Centrifugal Pump Repair CD-ROM Courses

Note: All CD-ROMs from ITC Learning will only run on Windows XP and older


     The following interactive multimedia CD-ROMs are available on Centrifugal Pump Repair.  Each CD can stand alone as a training tool for your use.  The 2 CD-ROMs available in this section are:

=======================================================

Centrifugal Pump Repair - 
Principles and Troubleshooting CD-ROM

Duration: 4 hours (includes 1 test)

Audience: This program is excellent for all levels of maintenance personnel as well as for the multicraft training needs of process and manufacturing facilities.  This lesson is designed for participants familiar with the basic operation of centrifugal pumps.  A familiarity with the relationship between flow rate and pressure is also required.

What Students Learn: This comprehensive Activ®  interactive multimedia training program consists of two lessons that train participants to disassemble, inspect, troubleshoot, and repair centrifugal pumps.

This lesson introduces the components and operating principles of a typical centrifugal pump.  Normal operating conditions for the pump are described and guidelines for troubleshooting excessive leakage, excessive temperature, and loss of capacity/loss of head are provided.

After completing the lesson, the learner will be able to:

    •   Identify and describe the functions of a centrifugal pump in a system and its components.
•   Recognize causes and symptoms of excessive leakage, excessive temperature, and loss of capacity/loss 
    of head.
•   Explain how pressure, flow rate, and temperature are affected by the system in which the pump operates.

Centrifugal Pump Repair -
Principles and Troubleshooting CD-ROM - $349.95
  Add to Cart

------------------------------------------------------------------------------

Centrifugal Pump Repair - 
Disassembly, Inspection, and Reassembly CD-ROM

Duration: 4 hours (includes 1 test)

Audience: This program is excellent for all levels of maintenance personnel as well as for the multicraft training needs of process and manufacturing facilities.  This lesson is designed for participants familiar with the basic principles of operation for centrifugal pumps.  A familiarity with troubleshooting procedures as well as the proper use of hand tools and precision measuring instruments is required.  Additionally, a familiarity with mechanical seals is recommended.

What Students Learn: This comprehensive Activ® interactive multimedia training program consists of two lessons that train participants to disassemble, inspect, troubleshoot, and repair centrifugal pumps.

This lesson demonstrates how to disassemble, inspect, and reassemble a typical end-suction pump.  The locations and functions of pump components are described as well as procedures for measuring and inspecting pump parts, and the steps for checking impeller clearance.  General guidelines for installing a mechanical seal are also provided.

After completing the lesson, the learner will be able to:

    •   Disassemble an end-suction pump.
•   Inspect the components of a centrifugal pump.
•   Measure the bearing seat on the shaft.
•   Measure shaft run out.
•   Reassemble an end-suction pump.
•   Check impeller clearance.
•   Calculate the thickness of shims needed to correct impeller clearance.
•   Determine the gasket size needed in the bearing end cap.
•   Install a mechanical seal.

 Centrifugal Pump Repair -
Disassembly, Inspection and Reassembly CD-ROM - $349.95
  Add to Cart

Note: All CD-ROMs from ITC Learning will only run on Windows XP and older

Note: CD-ROM Pricing is for the single user/single PC version.  
Call 888-777-0753 for network or multiple user pricing.

View Cart


To order by phone please call toll-free 888-777-0753 during regular business hours.

 

© Copyright 2007 Maintenance Resources, Inc.
Phone: 812.877.7119  -  Fax: 812.877.7116  -  E-Mail: info@maintenanceresources.com
Address: 1983 North Hunt Street  -  Terre Haute, IN 47805